Материал: 2048

readily performed if a simple copper or aluminum disk and a rather large compass are both mounted on the same vertical stem so that each may be rotated in its own bearing independently of the other. There is no more effective way to demonstrate the principle of the induction motor, of which there are several types. If the disk were rotated, the compass would follow at a speed always less than that of the disk; if the compass were ro-

Сtated, the disk would follow the former at a lower speed.

It should be clearly understood that motor action (rotation of the disk) is developed by induction. The current in the rotor (disk) is the result of electromagnetic induction, which, it will be remembered; requires that there be relative motion between flux and conductors. Thus, if the mechanical load on the rotor increases, the rotor slows down; this slowing down means greater relative motion between flux and rotor, a greater voltage and current, and hence more power to take care of the added load. In other words, the power developed by the rotor automatically adjusts itself to the

powerиrequired to drive the load.

In the actual motor, the rotor is obviously not a disk, but a well designed structure consisting of a laminated core containing a winding; nor is the main field a single concentrated pole moved by hand, but an even number of poles formed by a distributed winding in a slotted stator. The

stator poles are formed by the interaction of the fields of two or three phases, their result being the creation of an effect that is equivalent to a set of revolving poles.

51

7. Поставьте слова в необходимом порядке так, чтобы получились предложения.

1. understood, should be, that, It, developed, clearly, induction, the motor, is, by, action.

2. developed, automatically, required, in other words, adjusts, the power, Сrotor, to drive, the, by, power, to, the, itself, load, the.

3. motors, for, known, reason, are, It, motors, is, this, of, type, this, as, induction, that.

4. rotation, The direction, the, element, in, imparted, is, that, one, the same, as,иof, always, to the other, induced.

5. exactly, a transformer, The rotor, its, inductively, in the same, as, secondary, way, of, receives, the, power, receives, its, power.

6. are, two, or, The, fields, three, stator, the, poles, formed, the, of, interaction, phases,бАof, by.

7. discovered, The principle, was, induction motor, of, 1824, first, in.

8. directly, electrical power, to, through, and, is, brushes, a commutator, The, conducted, rotor, the.

8. Восстановите логический порядок предложений.

1.If the compass were rotated, the disk would follow the former at a lower speed.

2.The direction of the induced rotation in one element is always the same as that imparted to the other.

3.If the disk were rotated, the compass would follow at a speed always less than that of the disk.

4.Such an experiment can be readily performed if a simple copper or aluminum disk and a rather large compass are both mounted on the same vertical stem.

5.If a non-magnetic disk and a compass are pivoted with their axes parallel, so that one or both of the compass poles are located near the edge of the disk, the compass will rotate if the disk is made to spin, or the disk will rotate if the compass is made to spin.

6.Each may be rotated in its own bearing independently of the other.И

9. Найдите в тексте инфинитивы и определите их функции в предложении.

52

10. Переведите на английский язык следующие предложения:

1. В какой части электрического двигателя проиходит преобразование

вы знаете об устройствах, о которыхДидет речь в данном тексте.

Помогли ли ваши знания об этих устройствах пониманию текста? б) разделите текст на смысловые отрезки и предложите свои варианты заголовка/названия к каждой из частей.

SINGLE-PHASE INDUCTION MOTORS

Types of Single-Phase Motors. Great numbers of motors of comparatively small horsepower rating are designed to operate when connected to a single-phase source. Most of them, built in fractional-horsepower sizes, are technically termed small motors, a small motor being defined as “a motor built in a frame smaller than that having a continuous rating of hp, open type, at 1,700 to 1,800 rpm”. Single-phase motors are known to per-

53

form a great variety of useful services in the home, the office, the factory, in business establishments, on the farm, and many other places where electricity is available. The requirements of the numerous applications differing so widely, the motor-manufacturing industry has developed several types of such machines, each type having operating characteristics that

Сmeet definite demands. For example, one operates satisfactory on direct

current or any frequency up to 60cycles; another rotates at absolutely constant speed, regardless of the load; another develops considerate starting torque; and still another, although not capable of developing much starting torque, is nevertheless extremely cheap to make and very rugged.

и constructedбАin small sizes, operate at high speed, and include special design

The type of motor that performs with about equal satisfaction on direct current or alternating current up to 60 cycles is considered to be familiar d-c series motor. It is common practice that such motors are generally

features, so that commutation and armature-reactance difficulties are minimized. Since they may be connected to any of the commonly available sources of supply, they are appropriately referred to as universal motors.

The induction principle is applied to several types of single-phase motor. This principle involves the production of a revolving magnetic field, several methods having been developed for doing this in single-phase motors. One of these methods is employed in the shaded-pole motor, an extremely popular small motor used in low-starting-torque applications.

in a great many sizes and styles, offeringДthe user a choice of a number of desirable operating characteristics. There are, for example, (1) standard split-phase motors, (2) motors that employ the capacitors during the starting period only, and (3) motors that make use of one or more capacitors for starting and running duty.

The so-called reluctance-start motor is a second type of machine, made in rather limited numbers in small sizes that utilizes still another method to create the effect of rotating poles.

The split-phase type is considered perhaps to be most widely used of

all motors connected to single-phase sources of supply. It is manufactured И

Repulsion, repulsion induction, and repulsion-start motors are other types of single-phase machines that were widely applied until recent years. They have been largely replaced by split-phase motors of the capacitor type because the latter can be designed to perform as well as the repulsion types, offering in addition such advantages as lower cost and trouble-free service.

54

Synchronous motors, as the name implies, operate at synchronous speed for all values of load. There are several constructions of such ma-

4. Найдите в тексте синонимы к следующим словам:

to link, dimension, to be called, to determine, to do, demand, the use, for instance, stable, irrespective of, almost, velocity, usually, to make use of, may be, some.

55