pository can be more humid and, thus, it can intensify corrosion of the HLW containers. So, internal heat generation can be a serous capacitylimiting factor for the very expensive HLW repositories. The heat generation is mainly caused by radioactive decays of some long-lived fission products (137Cs, 90Sr) and minor actinides (radioisotopes of neptunium, americium and curium). In a relatively short-term perspective (100-200 years), fission products are main contributors into the internal heat generation. In a longer perspective (t > 1000 years) the dominant role in the decay heat generation passes from fission products to minor actinides.
Therefore, some advanced alternative approaches to the HLW management are under thorough studies now throughout the world. These approaches presume various options for extraction and partitioning of long-lived fission products (LLFP) and minor actinides. The separated radioisotopes can be further used as heat sources and sources of ionizing radiation in many industrial branches.
Minor actinides are able to enhance nuclear non-proliferation regime because neutron irradiation of 237Np and 241Am in nuclear reactors can transform them into plutonium isotope 238Pu, intense source of decay heat and spontaneous fission neutrons. Plutonium with high enough content of 238Pu becomes completely unsuitable for manufacturing of any nuclear explosive devices.
Some other approaches presume neutron transmutation of LLFP and minor actinides in the dedicated irradiation facilities (nuclear reactors, accelerator-driven systems, thermonuclear installations) where the most harmful radioisotopes can be converted into short-lived or stable nuclides.
1.6.4. Treatment of liquid middleand low-level RAW
The following procedures are used to treat liquid MLW and LLW:
1.Precipitation and removal of solid particles from the MLW and LLW solutions.
2.Ion-exchange purification of the clarified solutions.
3.Evaporation up to the dry sediment.
4.Immobilization by bituminization or cementation.
5.Placement of the solidified radiowastes into the steel containers.
101
6. Interim storage and ultimate disposal of the steel containers.
Bitumen as a material for RAW immobilization can offer the following advantages:
1.Low leaching rate by light water.
2.Suitability for immobilization of any chemical RAW forms (salts, hydroxides, organics).
3.Good radiation resistance.
However, bitumen is an inflammable material as a by-product of natural oil reprocessing, and bitumen softens under warming up.
The alternative option to the RAW bituminization is a cementation process, i.e. RAW implantation into the concrete blocks.
Concrete a material for RAW immobilization can offer the following advantages:
1.Low cost and simplicity of the cementation process.
2.Good radiation resistance.
3.High heat conductivity.
4.Concrete is not an inflammable material and does not soften when warmed up.
Unfortunately, concrete is very sensitive to the water leaching. Comparative data on the water leaching rates of the most widely known materials for RAW immobilization are presented below:
1. |
Glass: |
10-8 ¸ 10-7 |
g/cm2×day; |
2. SYNROC: |
10-6 ¸ 10-5 |
g/cm2×day; |
|
3. |
Bitumen: |
10-6 ¸ 10-4 |
g/cm2×day; |
4. |
Concrete: |
10-3 ¸ 10-2 |
g/cm2×day. |
That is why glasses and the SYNROC materials are preferentially used to immobilize HLW while bitumen and concrete – for immobilization of MLW and LLW.
Chemical stability of the concrete blocks can be enhanced by impregnating the cement mixture with some organic monomers. At solidification, the monomers are polymerized, and chemical stability of the concrete blocks improves substantially.
1.6.5. Treatment of gaseous RAW
Gaseous RAW can produce the following negative effects on human organism:
102
1.Direct external irradiation and irradiation by the fallen out radioactive particles.
2.Internal irradiation at inhalation of air contaminated with gaseous RAW.
3.Chemical toxicity of gaseous RAW at inhalation.
The following radioisotopes are main components of gaseous RAW:
1.Radioactive noble gases (radioisotopes of krypton and xenon).
2.Iodine radioisotopes.
3.Carbon radioisotope 14С.
4.Tritium.
After lengthy (5-10 years) staying in the SNF storage pool at NPP only the following relatively long-lived gaseous radioisotopes remained in RAW composition:
1.Of noble gases – only 85Kr (half-live T1/2 = 10,7 years).
2.Of iodine radioisotopes – only 129I (T1/2 = 1,6×107 years).
3.Radiocarbon 14С (T1/2 = 5730 years).
4.Tritium 3H (T1/2 = 12,3 years).
Removal of 85Kr. The following methods are used to remove 85Kr from gaseous RAW composition:
1.Cryogenic adsorption by activated charcoal or molecular sieves as ultra-filters.
2.Cryogenic adsorption by liquid carbon dioxide or liquid fluorocar-
bons.
Removal of 129I. In gaseous RAW composition the radioiodine can
be in the forms of molecular iodine I2, iodides (I-) and iodates (IO3-). The following methods are used to remove 129I from gaseous RAW composition:
1.Absorption of the radioiodine by alkaline or acidic solutions in scrubbers where the radioiodine is oxidized up to solid insoluble compound HI2O8.
2.Chemisorption of the radioiodine onto the zeolite impregnated with silver nitrate AgNO3. Molecular radioiodine is bound into insoluble silver iodide and silver iodate through the following chemical reaction:
2 AgNO3+ I2 + H2O + O2 ® AgI +AgIO3 + 2 HNO3 .
103
Removal of 14C. Gaseous RAW contains radiocarbon 14C in its oxide forms 14CO and 14CO2. Radiocarbon is a product of neutron 14N(n,p)14C reaction with nitrogen that is contained in air, in coolant and structural materials as an impurity.
Unfortunately, till now no any industrial-scale technologies have been developed to catch 14CO or 14CO2 efficiently. In laboratorial studies some fluorocarbons demonstrated highly efficient absorption of 14C (up to 99,9% 14C) within low temperature range from -400С to +40С.
Removal of tritium. In nuclear reactors tritium can be produced by neutron reactions with coolant and some impurities (hydrogen, lithium) in structural materials, In addition, tritium is a product of very rare ternary fission reactions with emission of three (not usual two) fission products. Since the ternary fissions can occur with very low probability, spent fuel contains only about 2×10-5 % 3H.
The following properties of tritium should be taken into account:
1.Tritium is a source of low-energy b-radiation.
2.Tritium can actively enter into the isotope exchange reaction with light water thus forming tritium water HTO or T2O at the SNF reprocessing. Therefore, tritium is present in all liquid RAW produced by aqueous technologies of the SNF reprocessing.
The following methods are used to remove tritium from gaseous RAW composition:
1.Voloxidation of spent fuel before its dissolution: oxidation by air at the elevated temperatures, 450-6500C. The air humidity can bind tritium into tritium water for further treatment as liquid RAW.
2.Chemisorption of tritium water by zeolite.
3.Light-water washing-out of organic TBP-containing fraction after the solvent-extraction process.
Treatment of volatile aerosols and dust. Volatile aerosols and dust
are gas-like materials with specific content of solid and liquid particles within the range from 10-2 g/m3 to 10 g/m3. The following methods are used to treat volatile aerosols and dust:
1.Gravitational deposition in the dust-collecting chambers.
2.Centrifugal removal of solid and liquid particles in cyclones. The gas flow enters into a cylindrical vessel at an angle to its vertical axis. Solid and liquid particles can strike against the wall and drop out of the gas flow.
104
3.Electrostatic deposition (imparting an electrical charge to solid and liquid particles and their deposition by electrical field).
4.Gas washing-out in scrubbers.
5.Ultra-filtration with application of the dedicated filters made of fiberglasses, polymers, metal-tissue and metal-ceramic materials.
1.6.6. Treatment of solid RAW
The following materials and products are the main components of solid RAW:
1.Details of nuclear equipment, construction materials, rubbish and working clothes before their decontamination.
2.Ion-exchange resins and filters.
3.Metal claddings of fuel rods.
4.Deposits on internal wall surfaces of technological equipment.
The following methods are used to treat solid RAW:
1.Reduction of RAW volume:
a.Incineration with up to 100-fold reduction of RAW volume.
b.Pressing with up to 10-fold reduction of RAW volume.
In total, RAW volume can be decreased by a factor of about 1000.
2. Placement of the remaining RAW into the steel containers, interim storage and ultimate disposal.
A special technology is used to treat radioactive claddings of fuel rods. The following processes caused their radioactivity:
1.Neutron irradiation in nuclear power reactors can transform some stable isotopes of iron, chromium, nickel, molybdenum and other constituents of stainless steels into appropriate radioisotopes.
2.Fission products and minor actinides can migrate from fuel meat to
fuel cladding. That is why fuel claddings can contain α-active radioisotopes.
3. Residuals of undissolved spent fuel.
Treatment of fuel claddings includes the following main stages:
1.Interim storage in concrete shelters under water layer (zirconium particles are pyrophoric in air).
2.Chemical treatment by hydrofluoric acid HF at the elevated temperatures (550-6000С). This treatment can form superficial friable films on
105